Strong Protection Function Lifepo4 Battery Cherger Automatic
Battery Charger For Lithium Battery
Car battery charger lithium battery charger introduction
- Deligreen 3.3kw/6.6kw Fully enclosed frequency conversion pulse
charger is specifically designed for electric vehicle power
batteries according to the national standards for chargers.
- This product has the advantages of high efficiency, small size,
high stability, long life, etc., and the full waterproof technology
has the characteristics of safe operation, high reliability,
complete protection and other characteristics under the protection
level of IP66. The built-in thermal sensor of the charger can work
reliably under the condition of -20 ℃- + 85 ℃; it has overheat
protection function, it can work reliably under the condition of
-20 ℃+ 85℃, and it can recover automatically.
- The battery charger is IP66 waterproof,guarantee it can work in any
weather
- The charger is with cables,plugs for free.confirm what plug types
do you need before placing order
- Both CAN w/t CAN version is avilable
- CAN protocal customization.TC CAN is avilable.
Wide voltage option
Besides 220V,110V fixed input voltage,this S2 car charger is
available with wide range of input voltage
| Input voltage range | Input current | Output Rated voltage | Max charging voltage | Max charging current | Power factor | Efficiency |
| AC 90～265V | ≤ 16A | 48V | 58.8V | 45A | ≥0.99 Half load | ≥93% Full load |
| 72v | 99v | 40A |
| 84V | 116V | 40A |
| 96v | 132V | 32A |
| 144V | 198V | 23A |
| 312V | 440V | 10A |
Protection function:
Protection
| Input over-voltage protection | AC264V |
| Input under-voltage protection | AC90V |
| Output over-voltage protection | Yes |
| Output start voltage | 0.3 times rated voltage |
| Output over-current protection | Yes |
| Over temperature protection | Power down from 85℃, shut off At 90 ℃ |
| Short circuit protection | Stop output |
| Reverse battery protection | Stop output |
| Ground protection | ≤ 100mΩ |
| C A N Communication protection | Automatically stop output when CAN communication fails |
| Power failure protection | Yes |
Safety specifications and others:
| Withstand pressure | Input to output:2000VAC≤ 10mA ,Input to ground:2000VAC≤ 12mA Output to ground:2000VAC≤ 10mA,All are 1 minute |
| Insulation resistance | Input, output, signal end to shell ≥ 10MΩ ,Test voltage 1000VDC |
| Electromagnetic immunity | Satisfy GB/T 18487.3-2001 11.3.1 |
| Electromagnetic disturbance | Satisfy GB/T 18487.3-2001 11.3.2 |
| Harmonic current | Satisfy GB 17625.1-2003 6.7.1.1 |
| Current rise time | ≤ 5S,Overshoot ≤ 5% |
| Off response time | 100% to 10%≤ 50mS,100% to 0%≤ 200mS |
| Protection level | IP66 |
| Vibration resistance | 10－25Hz Amplitude 1.2mm,25－500Hz 30m/s2, each direction 8 hours |
| Noise | ≤ 60dB(Class A) |
| MTBF | 150000H |
| Working environment | Relative temperature 5% -95% without condensation |
| Operating temperature | -20℃ ~ +85℃ |
| Storage temperature | -30℃ ~ +90℃ |
Shape and size
combination of 2 3.3KW battery charger
6.6KW Air cooling
Horizontal mounting size within S2-6.6KW
Connector type
Product appearance
(1) The outer surface should be flat, without obvious defects such
as scratches and deformation. The surface coating should be
uniform.
(2) The nameplates and signs are firmly installed and the
handwriting is clear.
(3) The parts and components shall be fastened and reliable, and
shall be free from defects and damages such as rust, burr and
cracks.
(4) Each product shall be marked with a product logo, including
part number, product trademark, product model, production number,
production company name, warning instructions, etc., at obvious
locations.
Packaging, transportation and storage
Packaging: Product name, model, specification, name of manufacturer
are printed on the label . The box contains the product manual.
Transportation: It is suitable for transportation by car, boat and
airplane. It should be protected from sun, moisture and civilized
transportation during transportation.
Storage: When the product is not in use, it should be stored in a
packing box. It should be kept in a clean, dry and well-ventilated
environment at 5 ℃ ～ 40 ℃. Avoid exposure to sunlight, fire and
water. The product has a shelf life of 2 years (from the
manufacturer,from the date of storage), if the storage time is too
long (more than 2 year), it should be tested by professional before
use.
Application
What is car battery charger?
- An electric vehicle/E-car charger is a device designed to charge
the vehicle battery of an electric vehicle. A power conversion
device with specific functions is used to charge the battery.
Electric vehicle chargers can be divided into DC chargers and AC
chargers.
How many amps do I need to charge a 12 volt battery?
Where is the best car battery charger to buy?
- Deligreen supplies the high quality car battery charger and it's
highly accepted by customers,pls send your inquiry at the end of
this page,we will contact you soon.
WHY CHOOSE US?
1,One-stop power provider including lithium battery
active balancer, BMS ,charger and other accessories.
2,Russial Poland/USA warehouse ensure quick delivery.
3,Factory direct price and whole life technical support.
4,Reliable warranty
Look for distributors! Make DIY Battery Easier!
FAQ
1. What kind of battery is suitable for this charger LiFePO4 battery and Lead acid battery.
2.How many kinds of connectors do you have?
US, UK, AU, EU
3.Do you support customization?
We support customized chargers, OEM.
4.The protection function of the charger:
(1)Over temperature protection. (2)Over current protection. (3)Over
voltage protection.
(4)Over power protection. (5)Short circuit protection. (6)Power saving fast Charging.
(7)Data logging. Intelligent control. (8)Strict testing.
(9)Spark-free design
All long pleasant business starts from good communication. Maybe
you have many other questions to ask.
We are always waiting for your inquiry. Even if we can't make the
deal,we can make friends,share information and learn from each
other.
