EVE MB30 306ah 10000 cycles LFP cell Lithium battery 3.2V Lithium
Iron Phosphate Power storage
NOTES:
MB30 EVE 306ahThis EVE 306ah is Bolt Stud type,comes with free busbars
For lithium battery pack,deep cycles
| Rated capacity | 306Ah |
| Rated voltage | 3.2V |
| Voltage range | 2.5V-3.65V |
| Cycle life | 10000 cycles,25 ℃ 70% SOH |
| Max charge current | 0.5C,153ah |
| Max discharge current | 0.5C,153ah |
| Initial internal resistance | 0.18mΩ±0.05mΩ |
| Weight | 5.6KG±0.3KG |
| size | 174*72*205mm |
| Discharging temperature | -30-60℃ |
This item is EVE Lifepo4 3.2V 306Ah item,QR code, Grade A+, Brand
new.
Internal resistance
Stacking cells have lower internal resistance,winding cells have
related higher IR.
Winding cell is usually a single pole ear, while a stacking cell
can be seen as a multi pole ear, greatly reducing its internal
resistance.
The different internal resistances result in different heat
generation and capacity decay rates during the charging and
discharging cycles
of finished batteries. It is evident that stacked batteries have
slower capacity decay.
Cycle life
For stacking batteries, the internal temperature distribution is
relatively uniform,Due to the unidirectional heat transfer between
the electrode and the
separator, the temperature gradient distribution of the winding
battery is relatively severe, resulting in high internal
temperature and low external temperature.
Uneven temperature distribution leads to the deactivation of active
substances at high temperature positions during the charging and
discharging process of the
battery, which prevents the function of lithium ion deintercalation
and affects the rapid decay at other positions, thereby affecting
the performance of the battery.
The internal stress of the battery cell
The edge of a winding battery cell is where stress is concentrated.
Based on past battery disassembly analysis experience, the bending
of the electrode is more prone to
micro short circuits, electrical breakdown, and lithium
deposition.The stress concentration point is the primary location
for battery deactivation, which also leads to a decrease
in the cycle life of wound batteries.
Charging&Discharging rate
The stacking cell is equivalent to parallel connection of multiple
electrodes, making it easier to complete high current discharge in
a short period of time, which is beneficial for the rate
performance of the battery. The winding process, on the other hand,
is exactly the opposite, with a single pole ear resulting in
slightly poorer rate performance.
Battery capacity density
Stacking batteries have a higher capacity density because their
internal space is more fully utilized.
The winding type battery has circular cells on both sides and the
last two layers of membranes occupy a certain thickness, resulting
in a lower capacity density.
Before shipment
